All Manuals > LispWorks Release Notes and Installation Guide > 10 Configuration on Linux, x86/x64 Solaris & FreeBSD > 10.4 Saving and testing the configured image


10.4.3 Testing the newly saved image

You should now test the new LispWorks image. To test a configured version of LispWorks, do the following:

  1. Change directory to /tmp .
  2. Verify that your DISPLAY environment variable is correctly set and that your machine has permission to connect to the display.
  3. Start up the new image.
  4. The window-based environment should now initialize--during initialization a window displaying a copyright notice will appear on the screen.

    You may wish to work through some of the examples in the LispWorks User Guide and Reference Manual , to further check that the configured image has been successfully built.

  5. Test the load-on-demand system. In the Listener, type:
  6. CL-USER 1 > (inspect 1)

    Before information about the fixnum 1 is printed, the system should load the inspector from the load-on-demand directory.

LispWorks Release Notes and Installation Guide - 23 Dec 2011