All Manuals > LispWorks Release Notes and Installation Guide > 9 Configuration on Windows > 9.4 Saving and testing the configured image

NextPrevUpTopContentsIndex

9.4.4 Testing the newly saved image

You should now test the new LispWorks image. To test a configured version of LispWorks, do the following:

  1. Start up the new image.
  2. The window-based environment should now initialize--during initialization a window displaying a copyright notice will appear on the screen.

    You may wish to work through some of the examples in the LispWorks User Guide and Reference Manual , to further check that the configured image has been successfully built.

  3. Test the load-on-demand system. In the Listener, type:
  4. CL-USER 1 > (inspect 1)

    Before information about the fixnum 1 is printed, the system should load the inspector from the load-on-demand directory.


LispWorks Release Notes and Installation Guide - 23 Dec 2011

NextPrevUpTopContentsIndex