The class interface is the top level window class, which contains both menus and a hierarchy of panes and layouts. Interfaces can also themselves be contained within a layout, in which case they appear without their menu bar.







The title of the interface.


The layout of the interface.


The items on the menu bar.


A flag controlling the automatic addition of system menu objects.


A callback done on creating the window.


A callback done on closing the window.


A function to verify closing of the window.


The best x position for the interface.


The best y position for the interface.


The best width of the interface.


The best height of the interface.


A function called when the interface geometry changes.


A function called when the interface is activated or deactivated.


A function called when the interface is iconified or restored.


A cursor that takes precedence over the cursors of panes inside the interface.


A boolean determining whether the interface has a message area.


A boolean determining whether Pointer Documentation is enabled.


A boolean determining whether Tooltip Help is enabled.


A function called when a user gesture requests help.


A function called around the top level event handler.


An integer or nil .


A pane, a symbol naming a pane, or nil .




Every interface can have a title title which when it is a top level interface is shown as a title on its window, and when it is contained within another layout is displayed as a decoration (see the class titled-object for more details).

The argument layout specifies a layout object that contains the children of the interface. To change this layout you can either use the writer pane-layout , or you can use the layout switchable-layout which allows you to easily switch the currently visible child.

The argument menu-bar-items specifies a list of menus to appear on the interface's menu bar.

auto-menus defaults to t , which means that an interface may have some automatic menus created by the environment in which it is running (for example the Works menu in the Common LispWorks environment). To switch these automatic menus off, pass :auto-menus nil .

When you have an instance of an interface, you can display it either as an ordinary window or as a dialog using respectively display and display-dialog. The CAPI calls create-callback (if supplied) with the interface as its single argument, after all the widgets have been created but before the interface appears on screen. Then to remove the interface from the display, you use quit-interface and either exit-dialog or abort-dialog respectively. When the interface is about to be closed, the CAPI calls the confirm-destroy-function (if there is one) with the interface, and if this function returns non- nil the interface is closed. Once the interface is closed, the destroy-callback is called with the interface.

The interface also accepts a number of hints as to the size and position of the interface for when it is first displayed. The arguments best-x and best-y must be the position as an integer or nil (meaning anywhere), while the arguments best-width and best-height can be any hints accepted by :visible-max-width and :visible-max-height for elements.

Whether or not an interface window is resizable is indicated as allowed by the window system. For non-resizable windows on Cocoa the interface window's maximize button is disabled and the resize indicator is not shown, and on Windows the maximize box is disabled.

geometry-change-callback may be nil , meaning there is no callback. This is the default value. Otherwise geometry-change-callback is a function of five arguments: the interface and the geometry. Its signature is:

geometry-change-callback interface x y width height

activate-callback may be nil , meaning there is no callback. This is the default value. Otherwise activate-callback is a function of two arguments: the interface and a boolean activatep which is true on activation and false on deactivation. Its signature is:

activate-callback interface activatep

inconify-callback may be nil , meaning there is no callback. This is the default value. Otherwise inconify-callback is a function of two arguments: the interface and a boolean iconify which is true when interface is iconified and and false when it is restored. Its signature is:

iconify-callback interface iconifyp

override-cursor , if non- nil , specifies a cursor that is used instead of the cursor of each pane inside the interface. The default value of override-cursor is nil . See below for an example of setting and unsetting the override cursor.

If message-area is true, then the interface has a message area at the bottom. The text of the message area can be accessed using the titled-object accessor titled-object-message . The default value of message-area is nil .

enable-pointer-documentation is a boolean controlling whether Pointer Documentation is enabled. The default value is t . The actual action is done by the help-callback .

enable-tooltips is a boolean controlling whether Tooltip Help is enabled. The default value is t . The actual action is done by the help-callback .

help-callback may be nil , meaning there is no callback. This is the default value. Otherwise help-callback is a function of four arguments: the interface, the pane inside interface where help is requested, the type of help requested, and the help key of the pane. Its signature is:

help-callback interface pane type help-key

Here type can be one of:


The cursor entered the pane. The function should set the pointer documentation.


The cursor left the pane. The function needs to reset the pointer documentation.


A tooltip is requested. The function needs to return a string to display in the tooltip, or nil if no tooltip should be displayed.


The function should display a detailed, asynchronous help. This value is passed when the user presses the F1 key (not implemented on Cocoa).

help-key is the help-key of pane , as described in element. See below for an example help-callback .

top-level-hook can be used to specify a hook function that is called around the interface's top level event handler. The hook is passed two arguments: a continuation function (with no arguments) and the interface. The hook must call the continuation, which normally does not return. top-level-hook is designed especially for error handling - see below for an example. It can also be used for other purposes, for instance to bind special variables around the top level function.

external-border controls how close to the edge of the screen the interface can be placed with explicit positioning using the best-x , best-y , best-height and best-width initargs or implicit positioning when a dialog is centered within its owner. The value nil allows the window to be anywhere, on or off the screen. The value 0 allows the window can be anywhere on the screen. If external-border is a positive integer then the window can be anywhere within external-border pixels from the edge of the screen. If external-border is a negative integer then the window be anywhere on the screen or up to external-border pixels off the edge of the screen. This does not affect whether the use can move the window after it has been displayed. It also does not affect the default positioning of interfaces, where the window system chooses the position.The default value of external-border is 0.

initial-focus specifies a pane which has the input focus when the interface is first displayed. See pane-initial-focus for more information about the initial focus pane.

Note: even though interface is a subclass of titled-object, the accessor titled-object-message-font cannot be used to get and set the font of the interface's message.

Compatibility Note

interface- iconize-callback is deprecated. Use the synonym interface-iconify-callback instead.

(capi:display (make-instance 'capi:interface
                             :title "Test Interface"))
(capi:display (make-instance
                :title "Test Interface"
                  #'(lambda (interface)
                             "Quitting ~S"
(capi:display (make-instance
                :title "Test Interface"
                #'(lambda (interface) 
                           "Really quit ~S"
(capi:display (make-instance
                    (make-instance 'capi:menu
                                   :title "Menu"
                                   :items '(1 2 3)))
                :title "Menu Test"))
(setq interface 
        :title "Test Interface"
        (make-instance 'capi:simple-layout 
                       (list (make-instance 
                              :text "Text Pane"))))))
(capi:execute-with-interface interface
 #'(setf capi:pane-layout) (make-instance 
                            (list (make-instance 
                                   :text "Editor Pane")))
  :title "Test"
  :best-x 200
  :best-y 200
  :best-width '(/ :screen-width 2)
  :best-height 300))

The following forms illustrate the use of help-callback :

(capi:define-interface my-interface ()
    :help-key 'input)
    :help-key 'output
    :text "some text"))
  (:menu-bar a-menu)
    "A menu"
    (("An item" :help-key "item 1")
     ("Another item" :help-key "item 2"))
    :help-key "a menu"))
    '(a-pane another-pane)))
   :help-callback 'my-help-callback
   :message-area t))
(defun do-detailed-help (interface)
    :text "Detailed help for my interface")
   (format nil "Help for ~a" 
           (capi:capi-object-name interface))))
(defun my-help-callback (interface pane type key)
  (declare (ignore pane))
  (case type
    (:tooltip (if (eq key 'input)
                  "enter something"
                (when (stringp key) key)))
     (when (stringp key)
       (setf (capi:titled-object-message interface)
     (setf (capi:titled-object-message interface)
           "Something else"))
    (:help (do-detailed-help interface ))))
 (make-instance 'my-interface :name "Helpful"))

The following forms illustrate the use of override-cursor to set and then remove an override cursor.

Create an interface with panes that have various different cursors. Move the pointer across each pane.

(setf interface 
         (loop for cursor 
               in '(:crosshair :hand :v-double-arrow)
               (make-instance 'capi:editor-pane 
                              :cursor cursor 
                              (format nil "~A CURSOR" 

Override the pane cursors by setting the override cursor on the interface, and move the pointer across each pane again.

(setf (capi:interface-override-cursor interface) 

Remove the override cursor.

(setf (capi:interface-override-cursor interface) 

This example illustrates top-level-hook . Evaluate this form and then get an error by Meta+Control+C (on Motif) or Control+Break (on Windows) in the editor pane. Then select the Destroy Interface restart.

  #'(lambda (func interface)
      (restart-case (funcall func)
        (nil ()
             (list "Destroy Interface ~a" interface)
             (capi:destroy interface))))))

This example illustrates the use of :create-callback :

(defun get-children (self)
  (let (children)
     self #'(lambda (x) 
              (push x children)))
    (with-slots (lp) self
      (setf (capi:collection-items lp) children))))
(defun get-children-data (x)
  (list (class-name (class-of x)) 
        (format nil "~X" (sys:object-address x))))
(capi:define-interface created-data () ()
    :text "A list populated via :CREATE-CALLBACK")
    :visible-min-height '(:character 3)
    :column-function 'get-children-data))
    '(title lp)))
   :create-callback 'get-children
   :title ":CREATE-CALLBACK Example Interface"
   :width 300))
(capi:display (make-instance 'created-data))
See also


LispWorks CAPI Reference Manual - 11 Apr 2005